Pelvis Boards

Positioning Cradles & Holders

# PPC-301     PelFix™   (Classical slide locking device)

# PPR-301     PelFix™   (MR compatible version)

This pelvis immobilization system utilizes a single sheet of thermoplastic over the entire abdomen or pelvis like the popular HipFix™ system but the baseplate is made 7mm carbon fiber which is much more durable for daily use. The low-melt thermoplastics assembled with two L-profile Handles and one groin piece can be easily locked onto this pelvic board by white nylon sliding clamps and the thermoplastics will harden to form rigid bespoke molds to offer accurate repositioning from simulation through the whole radiation treatment course.     

×

System has features as follows:

• Simply pushing the white Nylon sliding clamps to lock the pre-molded casts with two L-profile Handles and the groin piece on the baseplate, patients can get excellent and comfort immobilization during treatment.
• Larger cutout (30 x 38cm) for treatment needs while using with a belly board. All edges of the cutout window have 30° slope to increase patients comfort during whole treatment courses. Longer scale (from 0 cm ~ 70 cm) than other competition products on the market also makes bigger treatment area possible. Optional economy belly board # PPR-301-SBB made of Styrofoam™ comes with one small and one big reducers. Overall dimensions: 45cm x175m x 5cm.
• Two built-in handles make daily operation and transfer become easy. Most lock bars can be used to the locating grooves at the back top onto couches by IPPS™ technique. Optional plastic pegs at the back of the board can also be used to lock PelFix™ onto different treatment / imaging couches more efficiently.

Close

# PPP-301-1     Pre-Cut Casts without L-Handles

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPP-301-2     Pre-Cut Casts without L-Handles

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPT-301-1     Thermoplastics welded on Handles

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPT-301-2     Thermoplastics welded on Handles

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPC-321     Advanced PelFix™  (carbon fiber)
# PPR-321     Advanced PelFix™  (MR version)

Like # PPC-301, the advanced PelFix™ board also utilizes a single sheet of low-melt thermoplastic over the entire pelvis or abdomen as the anterior cast. Then the technicians can easily use the casts welded on two L-Profile Handles with push and pull docking pins plus a piece of groin piece by a traditional white nylon sliding clamp to lock the casts to the gray rails on the baseplate. The thermoplastics can harden to form rigid bespoke anterior molds to offer accurate re-positioning from simulation through radiation treatment course.      

×

System has features as follows:

• Like popular Type-S system, simply pushing the docking pins into docking holes on the four gray positioning cover plates to lock pelvis cast and pushing the white Nylon sliding clamp to lock the groin piece on the baseplate, patients can get excellent and comfort immobilization during treatment.
• Larger cutout ( 30cm x 38cm ) for treatment needs while using with a belly board and all edges of cutout window have 30゜slope to increase patients comfort during whole treatment courses. Longer scale ( from 0 cm~70 cm ) than other competition products on the market also makes bigger treatment area possible. The built-in handles on the both sides of this pelvis board also make daily treatments and transfers easy and efficient.
• Can use lock bars to lock the locating recesses at back top onto couches by IPPS™ technique. Optional plastic pegs at the back of the board can also be used to lock PelFix™ board onto different treatment/imaging couches efficiently.

Close

# PPP-321-2     Pre-Cut Casts without Handles

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPP-321-2 @R01     Pre-Cut Casts without Handles

Solid :

@AC20R01       @AC24R01      @AC32R01      @FC20R01      @FC24R01      @FC32R01

# PPT-321-2     Thermoplastic Welded on Handle & Docking Parts

Solid :

@AC200       @AC240      @AC320      @FC200      @FC240      @FC320

Perforated :

@AC204       @AC245      @AC326      @FC204      @FC245      @FC326

# PPT-321-2 @R01     Thermoplastic Welded on Handle & Docking Parts

Solid :

@AC20R01       @AC24R01      @AC32R01      @FC20R01      @FC24R01      @FC32R01