• Products
  • Radiation Therapy
  • Miscellaneous Accessories
  • Total Body Irradiation Stand
  • Tools
    Positioning Holders

    Dosimetry Films

    # TBI-114x110x280      Rotational Total Body Irradiation (TBI) Stand
    The Rotational Total Body Irradiation Stand was designed for use when treating the total body with electrons. The stand has an adjustable rotating platform that adjusts vertically based on the patient’s height and will rotate 360°. The platform is marked in 60° increments. The adjustable rotating platform is in the lowest position at 11 cm from the floor and is adjustable upward in 2.5 cm increments. This allows centering the patient to the central axis of the beam. The rotating platform is made of gray PVC covered with non-slip vinyl material & has a mounting hole for the seat post.

    The Rotation Motor attaches to the rotating platform with 4 mounting screws and the Motor Speed Controller attaches to the vertical "T" leg. The Motor Speed Controller is variable speed and adjustable from 3 to 7 RPM with scale markings at 3, 4, 5 and 6 RPM. A slow Start-up and Slow-down is designed into the Motor Speed Controller for patient stability. A 18 meters On/Off Rotation Remote Control Cable with a switch allows the therapist to start and stop the platform rotation from the control area. Long and short seat posts are included to provide maximum adjustment, in 0.6 cm increments, of the seat height. The seat post to be used is determined by the patient's leg inseam. After seat height is determined and the seat is locked to the seat post. The seat direction is set by rotating the seat post and locking when desired direction is selected.

    The rotational total body stand frame is made of 5cm steel tubing and the frame consists of two "T" legs with casters and a top stabilizer bar. Holes spaced 2.5cm apart on the vertical "T" legs allow easy adjustment of the rotating platform and hand rail assembly. This rotational TBI stand can be easily taken apart for transpotation and storage because the rotation motor can be removable from the rotating platform by removing the four mounting screws and the motor speed controller easily lifts off the vertical "T" leg. The top stabilizer bar, vertical "T" legs, adjustable rotating platform and rotational hand rail assembly are all removable for easy breakdown. The beam spoiler hanger assemblies attach to the top stabilizer bar. The stand has 4 swivel locking casters which allow easy movement and positioning.

    The Rotational Total Body Irradiation Stand Includes:
    • On/Off Rotation Remote Control Cable and Connector.
    • Adjustable Rotating Platform.
    • 2 Adjustable Seat Posts.
    • Variable Motor Speed Controller 3-7 RPM.
    • Rotational Hand Rail Assembly.
    • Rotation Motor.
    • 2 Beam Spoiler Hanger Assemblies.
    • Seat.
    • Frame.

    Overall Size: W: 114 x L: 110 x H: 280 cm
    Adjustment from Floor: 11 cm and up in 2.5 cm increments
    Platform Size: W: 96.5 x L: 78.7 cm
    Rotation Area: 56 cm Diameter.
    Rotation Speed: 3-7 RPM
    Power: 120 VAC
    Shipping Weight: 221 kg

    Dosimetry Films

    # TBI-SH      Safety Harness for Total Body Irradiation Stand
    Attaches to the top stabilizer bar and prevents a patient from falling.
    This item can be cleaned by hand using a cloth dampened with a mild detergent dissolved in water. DO NOT SOAK MATERIAL. For stubborn spots or stains, use a soft brush and the solution. Allow material to air dry fully before reuse. Weight Capacity: 227 kg.

    Copyright © Blessing Cathay Corporation