logo
  • Products
  • Radiation Therapy
  • Head & Neck Immobilization
  • Proton Therapy and SRS products
  • Proton Therapy and SRS
    Positioning Cradles & Holders




    Cast Production Power Table

    # PPT-621 Gamma Knife Mask
    The masks having different reinforced perforation and open face design is a better choice than the 3-point hybrid mask for ELEKTA ICON™ system to offer strong, rigid, non-invasive fixation. Compared to an invasive head frame, patients can be immobilized by these masks in a comfortable way while maintaining a similar stability. In addition, you can choose Aqua-cast™ and Fuzzy-Cast™ with different sizes and reinforced patterns for the masks you need. Masks with custom styles are also available upon request.


    Styles Reinforced 01 Reinforced 02 Reinforced 03 Reinforced V1 Reinforced V2 Reinforced V3
    Shape U-Frame mask U-Frame mask U-Frame mask U-Frame mask U-Frame mask U-Frame mask
    Material Codes @AC24R01 @AC24R02 @AC24R03 @AC24RV1 @AC24RV2 @AC24RV3
    Material Codes @AC32R01 @AC32R02 @AC32R03 @AC32RV1 @AC32RV2 @AC32RV3
    Material Codes @FC24R01 @FC24R02 @FC24R03 @FC24RV1 @FC24RV2 @FC24RV3
    Material Codes @FC32R01 @FC32R02 @FC32R03 @FC32RV1 @FC32RV2 @FC32RV3



    Cast Production Power Table

    # PPT-623 SRS Mask
    The low-melt partial and full head masks provide an alternative immobilization choice for non-invasive setup. They can be used in combination with the vacuum mouthpiece to provide flexibility in setup options and can be stored together with all patient-specific parts in the storage box for the whole treatment time and is compatible to Elekta Fraxion™ Head Support Module ST™ (P10106-111) & the previous Fraxion™ Frame (P10106-100).


    Styles Reinforced 01 Reinforced 02 Reinforced 03 Reinforced V1 Reinforced V2 Reinforced V3
    Shape SRS Mask SRS Mask SRS Mask SRS Mask SRS Mask SRS Mask
    Material Codes @AC24R01 @AC24R02 @AC24R03 @AC24RV1 @AC24RV2 @AC24RV3
    Material Codes @AC32R01 @AC32R02 @AC32R03 @AC32RV1 @AC32RV2 @AC32RV3
    Material Codes @FC24R01 @FC24R02 @FC24R03 @FC24RV1 @FC24RV2 @FC24RV3
    Material Codes @FC32R01 @FC32R02 @FC32R03 @FC32RV1 @FC32RV2 @FC32RV3



    Head Board

    # PPC-625 Head Board
    This head board is designed by Dr. W. C. Yu at Taichung Veterans General Hospital to fit on their Siemens MR coil for taking images in order to proceed stereotactic cranial radiosurgery by the new M6 Cyber-Knife™ system. The head board has six docking holes for accepting # PPT-625 SRS Masks and, therefore, has multiple fixation points without comprising on accuracy and precision for SRS or SRT.


    Styles Reinforced 01 Reinforced 02 Reinforced 03 Reinforced V1 Reinforced V2 Reinforced V3
    Shape Head Board Head Board Head Board Head Board Head Board Head Board
    Material Codes @AC24R01 @AC24R02 @AC24R03 @AC24RV1 @AC24RV2 @AC24RV3
    Material Codes @AC32R01 @AC32R02 @AC32R03 @AC32RV1 @AC32RV2 @AC32RV3
    Material Codes @FC24R01 @FC24R02 @FC24R03 @FC24RV1 @FC24RV2 @FC24RV3
    Material Codes @FC32R01 @FC32R02 @FC32R03 @FC32RV1 @FC32RV2 @FC32RV3



    Type-P Overlay

    # PPT-671    SRS Mask Kit for BrainLAB™ system

    The mask for ExacTrac® frameless radiosurgery system offers highly accurate delivery of single or multiple fractionated treatments without using conventional head rings. The patient-friendly head and neck mask facilitates a streamlined workflow, overcoming the restrictions of frame-based radiosurgery & improving scheduling flexibility for imaging, planning and treatments. Stereotactic sub- millimeter precision can be achieved with the patient’s skull serving as the localization geometry, allowing for single fraction radiosurgery.
    The SRS mask kits comes with a top mask, middle mask, rear mask, a thermoplastic slab and some pellets in one set. Three mask pieces can be sequentially secured onto a U-shaped appliance attached to the treatment table to hold the head still and thermoplastic strip & pellets can provide rigid immobilization of tongue & nose.

    Mold Maker Mold Maker Mold Maker Mold Maker
    Top Mask (2.0mm) Middle Mask (3.2mm) Rear Mask (3.2mm) Thermoplastic slab and small pellets in 25 grams



    Type-P Overlay

    SRS Mask Kits for BrainLAB™ system

    The mask for ExacTrac® frameless radiosurgery system offers highly accurate delivery of single or multiple fractionated treatments without using conventional head rings. The patient-friendly head and neck mask facilitates a streamlined workflow, overcoming the restrictions of frame-based radiosurgery & improving scheduling flexibility for imaging, planning and treatments. Stereotactic sub-millimeter precision can be achieved with the patient’s skull serving as the localization geometry, allowing for single fraction radiosurgery. The SRS mask kits comes with a top mask, middle mask, rear mask, a thermoplastic slab and some pellets in one set. Three mask pieces can be sequentially secured onto a U-shaped appliance attached to the treatment table to hold the head still and thermoplastic strip & pellets can provide rigid immobilization of tongue & nose.

    Experience our new masks without cutting edges and hair-sticking problems !!!

    # PPT-681    SRS mask kit

    Mold Maker Mold Maker Mold Maker Mold Maker
    Top Mask (2.0mm) Middle Mask (3.2mm) Rear Mask (3.2mm) Slab & pellets in 25 grams

    # PPT-682    SRS mask kit

    Mold Maker Mold Maker Mold Maker Mold Maker
    Top Mask (3.2mm) Middle Mask (3.2mm) Rear Mask (3.2mm) Slab & pellets in 25 grams



    Type-P Overlay

    # PPC-701    Type-P Overlay

    The skull frame baseplate is designed to meet the unique requirements of Proton Therapy for patient immobilization and beam transmission. The head module is specifically and accurately engineered to rigidly support the patient without using a flat base that blocks the use of important proton beam angles. The conformal shape is desired to minimize the distance between the patient and the field defining aperture, optimizing the beam proton penumbra. The Type-P overlay also incorporates the couch-mounting mechanisms found in the traditional IMRT boards to facilitate the use of the same device in combined proton and conventional photon therapy.

    Mold Makers # PPC-701-SMM and # PPC-701-LMM can help technicians create perfect custom pillows to maximize patient comfort and minimize the gap between skull and baseplate.

    # PPC-701-LMM Large Mold Maker # PPC-701-SMM Small Mold Maker
    # PPC-701-LMM # PPC-701-LMM # PPC-701-SMM # PPC-701-SMM



    P-Frame Mask

    P-Frame 3D Masks with curved plastic frames
    # PPT-701-2725     without Cranial Flaps
    Material Codes:
    @AC244       @AC326       @FC245        @FC326




    P-Frame Mask

    P-Frame 3D Masks with curved plastic frames
    # PPT-701-2733-CF     with Cranial Flaps
    Material Codes:
    @AC244       @AC326       @FC245       @FC326




    P-Frame Mask

    P-Frame 3D Masks with curved plastic frames
    # PPT-701-2747     without Cranial Flaps
    Material Codes:
    @AC244       @AC326       @FC244       @FC326




    P-Frame Mask

    P-Frame 3D Masks with curved plastic frames
    # PPT-701-2752-CF     with Cranial Flaps
    Material Codes:
    @AC244       @AC326       @FC244       @FC326


    Our P-Frame 3D Masks with curve plastic frames are specially designed and produced for Proton Therapy. Unlike other masks on the market, the plastic frames are more easily to mount onto the curved skull and shoulders of the baseplate to get conformal immobilization for accurate treatments.




    Type-P Overlay

    # PPC-711    Hit™ Headboard

    This head board was developed by Taipei Veteran General Hospital for their Compact Heavy-Ion Therapy System from HITACHI installed in year 2022. Therapists can accurately tilt the baseplate from -30° to +30° for providing maximum patient comfort and excellent immobilization for 6DoF (Six degree of freedom) treatments.

    Type-P Overlay Type-P Overlay Type-P Overlay

    # PPT-711    S-Frame Masks for Heavy Ion Therapy

    Type-P Overlay Materials 2.0mm 2.4mm 3.2mm 4.0mm 4.8mm
    Codes @AC200 @AC240 @AC320 @AC400 @AC480
    Codes @FC200 @FC240 @FC320 @FC400 @FC480



    # PPC-721     Hit™ PelFix System
    A complete kit comes with one baseplate, one addon panel, two prone wedges shown below.

    Hit™ BodyFix System

    Thermoplastic

    # PPT-721-2     Thermoplastic Welded on Handle & Docking Parts

    Solid :

    @AC200       @AC240      @AC320      @FC200      @FC240      @FC320

    Perforated :

    @AC204       @AC245      @AC326      @FC204      @FC245      @FC326




    Thermoplastic

    # PPT-721-2 @R01     Thermoplastic Welded on Handle & Docking Parts

    Solid :

    @AC20R01       @AC24R01      @AC32R01      @FC20R01      @FC24R01      @FC32R01

    Copyright © Blessing Cathay Corporation